Lines Matching refs:kernel

7    and a basic Linux kernel WiMAX stack.
11 * Linux installation with Linux kernel 2.6.22 or newer (if building
16 + Linux kernel development package for the target kernel; to
17 build against your currently running kernel, you need to have
18 the kernel development package corresponding to the running
19 image installed (usually if your kernel is named
26 2.1. Compilation of the drivers included in the kernel
28 Configure the kernel; to enable the WiMAX drivers select Drivers >
32 If USB or SDIO are not enabled in the kernel configuration, the options
36 Compile and install your kernel as usual.
48 To install in the default kernel directories (and enable auto loading
54 If your kernel development files are located in a non standard
55 directory or if you want to build for a kernel that is not the
58 $ make KDIR=/path/to/kernel/dev/tree
80 This package contains two major parts: a WiMAX kernel stack and a
87 The i2400m kernel driver is broken up in two main parts: the bus
101 abstraction layers are used, so to port to another OS, the Linux kernel
109 and output messages in the kernel log (dmesg, /var/log/messages or
124 Module parameters can be set at kernel or module load time or by
138 During kernel bootup (if the driver is linked in the kernel), specify
139 the following to the kernel command line:
155 * /sys/kernel/debug/wimax:DEVNAME/ for the generic WiMAX stack
157 * /sys/kernel/debug/wimax:DEVNAME/i2400m for the i2400m generic
159 * /sys/kernel/debug/wimax:DEVNAME/i2400m-usb (or -sdio) for the
163 /sys/kernel/debug, those paths will change.
170 # find /sys/kernel/debug/wimax\:wmx0 -name \*dl_\*
171 /sys/kernel/debug/wimax:wmx0/i2400m-usb/dl_tx
172 /sys/kernel/debug/wimax:wmx0/i2400m-usb/dl_rx
173 /sys/kernel/debug/wimax:wmx0/i2400m-usb/dl_notif
174 /sys/kernel/debug/wimax:wmx0/i2400m-usb/dl_fw
175 /sys/kernel/debug/wimax:wmx0/i2400m-usb/dl_usb
176 /sys/kernel/debug/wimax:wmx0/i2400m/dl_tx
177 /sys/kernel/debug/wimax:wmx0/i2400m/dl_rx
178 /sys/kernel/debug/wimax:wmx0/i2400m/dl_rfkill
179 /sys/kernel/debug/wimax:wmx0/i2400m/dl_netdev
180 /sys/kernel/debug/wimax:wmx0/i2400m/dl_fw
181 /sys/kernel/debug/wimax:wmx0/i2400m/dl_debugfs
182 /sys/kernel/debug/wimax:wmx0/i2400m/dl_driver
183 /sys/kernel/debug/wimax:wmx0/i2400m/dl_control
184 /sys/kernel/debug/wimax:wmx0/wimax_dl_stack
185 /sys/kernel/debug/wimax:wmx0/wimax_dl_op_rfkill
186 /sys/kernel/debug/wimax:wmx0/wimax_dl_op_reset
187 /sys/kernel/debug/wimax:wmx0/wimax_dl_op_msg
188 /sys/kernel/debug/wimax:wmx0/wimax_dl_id_table
189 /sys/kernel/debug/wimax:wmx0/wimax_dl_debugfs
197 $ echo 3 > /sys/kernel/debug/wimax:wmx0/i2400m/dl_tx
208 $ cat /sys/kernel/debug/wimax:wmx0/i2400m/rx_stats
221 $ echo 1 > /sys/kernel/debug/wimax:wmx0/i2400m_rx_stats
235 $ echo 1 > /sys/kernel/debug/wimax:wmx0/i2400m/trace_msg_from_user
240 /sys/kernel/debug/wimax:wmx0/reset, the driver performs a warm (without
246 By writing any value to the /sys/kernel/debug/wimax:wmx0 file, the
253 If upon connecting the device, the following is output in the kernel