Lines Matching refs:only

190 		bit 0: Enable crop support. Cropping will take only part of the
213 		bit 0: Enable crop support. Cropping will take only part of the
287 The only difference between the TV and S-Video input is that the TV has a
364 is provided. You can only set the EDID for HDMI inputs. Internally, however,
416 There are three types of VBI capture devices: those that only support raw
417 (undecoded) VBI, those that only support sliced (decoded) VBI and those that
426 The VBI device will only work for the S-Video and TV inputs, it will give
433 There are three types of VBI output devices: those that only support raw
434 (undecoded) VBI, those that only support sliced (decoded) VBI and those that
440 The VBI device will only work for the S-Video output, it will give
461 modes. In the 'Controls' mode the RDS information is stored in read-only
586 	test pattern should be shown, and if so, whether only counters should
633 	This only applies if the CSC Colorbar test pattern is selected,
643 	generating an image. This only applies if the CSC Colorbar test pattern is
653 	a Y'CbCr image.	This only applies if the format is set to a Y'CbCr format
672 	user control to the red color of the test pattern only.
674 Enable Capture Cropping: enables crop support. This control is only present if
678 Enable Capture Composing: enables composing support. This control is only
683 	and downscaling). This control is only present if the ccs_cap_mode
692 Fill Percentage of Frame: can be used to draw only the top X percent
695 	problematic. By drawing only part of the image this CPU load can
704 Enable Output Cropping: enables crop support. This control is only present if
708 Enable Output Composing: enables composing support. This control is only
713 	and downscaling). This control is only present if the ccs_out_mode
721 The following two controls are only valid for video and vbi capture.
737 The following two controls are only valid for video capture.
753 The following controls are only present if the no_error_inj module option
788 	marked as having suffered a fatal error, the only way to recover
831 RDS Music: these are all read-only controls. If RDS Rx I/O Mode is set to
834 	that the vivid implementation of this is pretty basic: they are only
847 	RDS) data instead of RDS (European-style RDS). This affects only the
882 and VBI looping is only supported between S-Video and HDMI inputs and outputs.
883 VBI is only valid for S-Video as it makes no sense for HDMI.
889 Looping is currently supported only between devices created by the same
939 for either raw or sliced VBI. Note that at the moment only CC/XDS (60 Hz formats)
970 only applies to the TV/S-Video/HDMI inputs and outputs. The reason is that
977 (4096 * 4) x (2160 x 4), but it can only scale up or down by a factor of 4 or
1001 is set, then the alpha component is only used for the color red and set to
1031 FIELD_ALTERNATE, then only the top or bottom fields will be copied to the overlay.
1033 The overlay only works if you are also capturing at that same time. This is a
1099 Output overlays only work if the driver has been configured to create a
1134   "Controls" RDS Rx I/O Mode as the read-only RDS controls could be updated