Lines Matching refs:inputs

9 Up to 64 vivid instances can be created, each with up to 16 inputs and 16 outputs.
15 These inputs and outputs act exactly as a real hardware device would behave. This
84 device with webcam, TV, S-Video and HDMI inputs, a video output device with
88 The number of instances, devices, video inputs and outputs and their types are
112 num_inputs: the number of inputs, one for each instance. By default 4 inputs
113 	are created for each video capture device. At most 16 inputs can be created,
117 	what the type of each input is when the inputs are created for each driver
127 	So to create a video capture device with 8 inputs where input 0 is a TV
128 	tuner, inputs 1-3 are S-Video inputs and inputs 4-7 are HDMI inputs you
200 	Note that this value is ignored by webcam inputs: those enumerate
258 four inputs are configured: a webcam, a TV tuner, an S-Video and an HDMI
290 These inputs support audio inputs as well: one TV and one Line-In. They
295 These inputs support all combinations of the field setting. Special care has
336 Finally, for these inputs the v4l2_timecode struct is filled in in the
343 The HDMI inputs supports all CEA-861 and DMT timings, both progressive and
363 For HDMI inputs it is possible to set the EDID. By default a simple EDID
364 is provided. You can only set the EDID for HDMI inputs. Internally, however,
365 the EDID is shared between all HDMI inputs.
426 The VBI device will only work for the S-Video and TV inputs, it will give
541 brightness range (minimum and maximum control values). Switching inputs will
882 and VBI looping is only supported between S-Video and HDMI inputs and outputs.
970 only applies to the TV/S-Video/HDMI inputs and outputs. The reason is that