Lines Matching refs:controls

23 - Working brightness, contrast, saturation and hue controls
185 	select this through controls.
208 	select this through controls.
234 no_error_inj: if set disable the error injecting controls. This option is
236 	exercise all controls including a control like 'Disconnect' which
242 	controls that select crop, compose and scale behavior are also
292 controls 'Standard Signal Mode' and 'Standard' determine what
462 controls. These controls are updated every time the frequency is changed,
494 using controls, and in 'Block I/O' mode the blocks are passed to the driver
516 Different devices support different controls. The sections below will describe
524 Integer Menu are controls that represent all possible control types. The Menu
527 Both menu controls also have a non-zero minimum control value.  These features
529 These controls are supported for every device type.
535 The following controls are specific to video capture.
537 The Brightness, Contrast, Saturation and Hue controls actually work and are
543 This allows you to test controls that can change their range.
545 The 'Gain, Automatic' and Gain controls can be used to test volatile controls:
550 The 'Horizontal Flip' and 'Vertical Flip' controls can be used to flip the
552 controls.
561 The following controls are specific to video capture and output and radio
564 The 'Volume' and 'Mute' audio controls are typical for such devices to
572 These vivid custom controls control the image generation, error injection, etc.
612 These controls are all specific to video capture.
702 These controls are all specific to video output.
721 The following two controls are only valid for video and vbi capture.
737 The following two controls are only valid for video capture.
753 The following controls are only present if the no_error_inj module option
754 is set to 0 (the default). These controls are valid for video and vbi
831 RDS Music: these are all read-only controls. If RDS Rx I/O Mode is set to
833 	to "Controls", then these controls report the received RDS data. Note
852 	the RDS controls mentioned above.
868 RDS Music: these are all controls that set the RDS data that is transmitted by
873 	provided by the RDS controls mentioned above.
962 which features are supported can be selected through the Vivid controls,
1134   "Controls" RDS Rx I/O Mode as the read-only RDS controls could be updated