Lines Matching refs:S

11 Each input can be a webcam, TV capture device, S-Video capture device or an HDMI
12 capture device. Each output can be an S-Video output device or an HDMI output
47 Section 2.2: TV and S-Video Inputs
50 Section 3.1: S-Video Output
84 device with webcam, TV, S-Video and HDMI inputs, a video output device with
85 S-Video and HDMI outputs, one vbi capture device, one vbi output device, one
124 		10: this is an S-Video input
128 	tuner, inputs 1-3 are S-Video inputs and inputs 4-7 are HDMI inputs you
143 		0: this is an S-Video output
147 	S-Video outputs and outputs 4-7 are HDMI outputs you would use the
258 four inputs are configured: a webcam, a TV tuner, an S-Video and an HDMI
284 Section 2.2: TV and S-Video Inputs
287 The only difference between the TV and S-Video input is that the TV has a
310 The initially selected colorspace when you switch to the TV or S-Video input
375 information), but by default two outputs are configured: an S-Video and an
382 Section 3.1: S-Video Output
386 The S-Video output supports all TV standards.
390 The initially selected colorspace when you switch to the TV or S-Video input
426 The VBI device will only work for the S-Video and TV inputs, it will give
440 The VBI device will only work for the S-Video output, it will give
623 	S-Video input should be 4x3, 16x9 or anamorphic widescreen. This may
882 and VBI looping is only supported between S-Video and HDMI inputs and outputs.
883 VBI is only valid for S-Video as it makes no sense for HDMI.
899 Once enabled any video S-Video or HDMI input will show a static test pattern
904   video from the S-Video output.
907   So it is not possible to loop a 50 Hz (720x576) S-Video output to a 60 Hz
908   (720x480) S-Video input, or a 720p60 HDMI output to a 1080p30 input.
927 - on the input side the "Standard Signal Mode" for the S-Video input or the
970 only applies to the TV/S-Video/HDMI inputs and outputs. The reason is that