Lines Matching refs:Mode

292 controls 'Standard Signal Mode' and 'Standard' determine what
477 mode or both, which is configurable with the "Radio HW Seek Mode" control.
585 OSD Text Mode: selects whether the text superimposed on the
723 Standard Signal Mode: selects the behavior of VIDIOC_QUERYSTD: what should
739 DV Timings Signal Mode: selects the behavior of VIDIOC_QUERY_DV_TIMINGS: what
816 Transmit Mode: sets the transmit mode of the HDMI output to HDMI or DVI-D. This
831 RDS Music: these are all read-only controls. If RDS Rx I/O Mode is set to
832 	"Block I/O", then they are inactive as well. If RDS Rx I/O Mode is set
838 Radio HW Seek Mode: can be one of "Bounded", "Wrap Around" or "Both". This
850 RDS Rx I/O Mode: this can be "Block I/O" where the RDS blocks have to be read()
871 RDS Tx I/O Mode: this can be "Block I/O" where the application has to use write()
927 - on the input side the "Standard Signal Mode" for the S-Video input or the
928   "DV Timings Signal Mode" for the HDMI input should be configured so that a
934 This can be turned off by changing the "OSD Text Mode" control of the video
1134   "Controls" RDS Rx I/O Mode as the read-only RDS controls could be updated