Lines Matching refs:USB
3 The USB serial driver currently supports a number of different USB to
48 HandSpring Visor, Palm USB, and Clié USB driver
50 This driver works with all HandSpring USB, Palm USB, and Sony Clié USB
54 up to the host as a valid USB device. When this happens, the device is
79 necessary. Some devices need this before they can talk to the USB port
95 and other PDAs running Windows CE 3.0 or PocketPC 2002 using a USB
104 significant advantage of using USB is speed - I can get 73 to 113
108 the USB connection. Please visit http://synce.sourceforge.net which
121 whatever you named your new USB connection). You should finally wind
134 a terminal on /dev/ttyUSB0, it gives you a "USB Reflash" terminal, which can
164 not all of the standard USB descriptors are handled: Get_Status, Set_Feature
198 -TripNav TN-200 USB GPS
199 -Navis Engineering Bureau CH-4711 USB GPS
223 -DeLorme's USB Earthmate GPS (SiRF Star II lp arch)
268 This driver supports the Digi AccelePort USB 2 and 4 devices, 2 port
269 (plus a parallel port) and 4 port USB serial converters. The driver
270 does NOT yet support the Digi AccelePort USB 8.
277 on the USB 2 is supported as a serial to parallel converter; in other
278 words, it appears as another USB serial port on Linux, even though
279 physically it is really a parallel port. The Digi Acceleport USB 8
287 Belkin USB Serial Adapter F5U103
337 MCT USB Single Port Serial Adapter U232
339 This driver is for the MCT USB-RS232 Converter (25 pin, Model No.
345 It is derived from the Belkin USB Serial Adapter F5U103 driver and its
351 driver. Also, D-Link's DU-H3SP USB BAY also works with this driver.
382 REINER SCT cyberJack pinpad/e-com USB chipcard reader
387 This is the kernel part of the driver for this USB card reader.
399 in it. This includes a number of single port USB to serial converters,
400 more than 70% of USB GPS devices (in 2010), and some USB UPSes. Devices
408 KL5KUSB105 chipset / PalmConnect USB single-port adapter
435 This driver is for the Winchiphead CH341 USB-RS232 Converter. This chip
477 This driver has been successfully used to connect to the NetChip USB
478 development board, providing a way to develop USB firmware without
489 above, or join the Linux-USB mailing list (information on joining the