Lines Matching refs:sec

7     - "High Speed" 480 Mbit/sec (60 MByte/sec)
8     - "Full Speed" 12 Mbit/sec (1.5 MByte/sec)
9     - "Low Speed" 1.5 Mbit/sec
143 them.  The 480 Mbit/sec "raw transfer rate" is obeyed by all devices,
153 So more than 50 MByte/sec is available for bulk transfers, when both
156 approach the quoted 480 MBit/sec transfer rate.
161 20 MByte/sec transfer rates.  This is of course subject to change;
165 at around 28 MByte/sec aggregate transfer rate.  While this is clearly
166 enough for a single device at 20 MByte/sec, putting three such devices
167 onto one bus does not get you 60 MByte/sec.  The issue appears to be
175 sets will get closer to that 60 MByte/sec target.  That includes an
187 To get even 20 MByte/sec transfer rates, Linux-USB device drivers will