Lines Matching refs:you

13    **  enter `scan' on the video mode prompt, pick the mode you want to use,
19 option of LILO (or some other boot loader you use) or by the "vidmode" utility
29    0..35 - Menu item number (when you have used the menu to view the list of
30       modes available on your adapter, you can specify the menu item you want
38       hexadecimal numbers -- you have to convert it to decimal manually.
44 to continue or wait 30 secs" message. If you press <RETURN>, you enter the
45 menu, if you press <SPACE> or wait 30 seconds, the kernel will boot up in
63 how to enable it if you really want) as it's inherently unreliable due to
70    <flashing-cursor-here> encourages you to enter the item number or mode ID
71 you wish to set and press <RETURN>. If the computer complains something about
72 "Unknown mode ID", it is trying to tell you that it isn't possible to set such
86    If you are not happy with the mode list offered (e.g., if you think your card
87 is able to do more), you can enter "scan" instead of item number / mode ID.  The
92 `ghost modes'). If you are afraid this could damage your monitor, don't use this
104 by entering its mode directly if you know it even if it isn't shown on the menu.
109 	outside the menu as this can change from boot to boot (especially if you
145    If you add 0x8000 to the mode ID, the program will try to recalculate
154 All of them are simple #define's -- change them to #undef's when you want to
158 off by default as it's a bit unreliable due to terribly bad PC design. If you
161 are not completely sane. In case you really need this feature, please drop me
166 you can switch it off and report as a bug.
176 buffer. (If you have old LILO, you can adjust heap_end_ptr and loadflags
196 unless you think you know what you're doing. To activate this setup, use
203 the configuration options listed in section 4. If it fails, you can still use
209    If you start Linux from M$-DOS, you might also use some DOS tools for
210 video mode setting. In this case, you must specify the 0x0f04 mode ("leave
211 current settings") to Linux, because if you don't and you use any non-standard
214    If you set some extended mode and there's one or more extra lines on the
220    If you have a VGA card and your display still looks as on EGA, your BIOS
221 is probably broken and you need to set the CONFIG_VIDEO_400_HACK switch to