Lines Matching refs:used

29 The "pxa2xx_spi_master.num_chipselect" field is used to determine the number of
33 be used.  This caused the driver to acquire two DMA channels: rx_channel and
100 used to configure the SSP hardware fifo.  These fields are critical to the
109 The "pxa2xx_spi_chip.dma_burst_size" field is used to configure PXA2xx DMA
116 The "pxa2xx_spi_chip.timeout" fields is used to efficiently handle
122 The "pxa2xx_spi_chip.enable_loopback" field is used to place the SSP porting
127 The "pxa2xx_spi_chip.cs_control" field is used to point to a board specific
132 NOTE: the SPI driver cannot control the chip select if SSPFRM is used, so the
165 	.dma_burst_size = 8, /* Byte wide transfers used so 8 byte bursts */
173 	.dma_burst_size = 8, /* Byte wide transfers used so 8 byte bursts */
212 The following logic is used to determine the type of I/O to be used on