Lines Matching refs:with
4 This file is a collection of all the old Readme files distributed with
10 you have problems with it, please contact him or the current device-specific
16 they are gone forever. Keeping this in mind and with a grain of salt this
26 sites). It gives instructions about using sound with Linux. It's bit out of
31 with OSS API.
38 contain useful utilities to be used with this driver.
145 values for the sound card than with DOS.
151 The following errors are likely with /dev/dsp and /dev/audio.
166 with impossible parameters. Check that the application is
175 Check that your kernel version works with this
186 yourself (in this case use the version that is distributed with kernel
199 use with various sound cards.
223 Readme.cards for info about configuring the driver with your card. Also
229 Configuring version 3.8 (for Linux) with some common sound cards
232 This document describes configuring sound cards with the freeware version of
261 The number one mistake is to assume that your card is compatible with
274 problems which you will encounter by using SB mode with cards that are not
282 noise with a 8 bit only device.
300 cards. The problem with PnP cards is that the standard Linux doesn't currently
307 more than an year ago. The PnP version has the same name but with "PnP"
309 model works with Linux but the PnP one doesn't.
312 of the card or in the documentation or package that came with the card.
356 works with older machines but causes a hard reset of all cards on recent
374 solution which may be incompatible with future kernel versions having proper
376 versions of isapnptools so at least version 1.6 is required with sound cards.
387 There are currently many cards that work with this driver. Some of the cards
414 using isapnptools before they work with OSS/Free.
418 is compatible just with SB Pro but there is also a non-SB-
422 (try with the MAD16 driver).
427 first. The only cards that work with the SB driver in
429 one chip on the card with "CREATIVE" printed on it). The
437 (8 bit only) SB compatible mode doesn't work with Linux. If
438 you get it working it may cause problems with games and
445 Use the SB mode with "clones" only if you don't find anything
454 GUS PnP (with RAM)
457 The driver works both with the full (intelligent mode) MPU-401
458 cards (such as MPU IPC-T and MQX-32M) and with the UART only
460 interface. Most sound cards are compatible with it. However,
461 don't enable MPU401 mode blindly. Many cards with native support
463 will cause a conflict with these cards. So check if your card is
480 Enabling the MSS support with these cards is likely to
491 just the OPL3 mode directly. Most cards with an OPL4 (like
510 confused with the original OPL3 chip (YMF278) which is entirely
515 are PnP chips and will not work with the OPL3-SA1 driver. You should
516 use the standard MSS, MPU401 and OPL3 options with these chips and to
521 SoftOSS is a software based wave table emulation which works with
525 to have MMX) perform significantly better with SoftOSS than earlier
534 CONFIG_SOFTOSS_RATE to 44100 (kHz). However with slower systems it
537 system when playing MIDI files with hight degree of polyphony
544 required. SoftOSS should never be used on machines with less than 16 MB
559 IMPORTANT NOTICE! The original patch set distributed with the Gravis
562 if you like to use these patches with SoftOSS included in OSS/Free.
590 VIVO90 cards are not compatible with Soundscapes so the Soundscape
591 driver will not work with them. You may want to use OSS/Linux with these
606 It's possible to use 82C931 with OSS/Free by jumpering it to non-PnP
608 82C931 is compatible with 82C930 and should work with the MAD16 driver
624 NOTE! Don't ever try to use isapnptools with CS4232 since this will just
626 CS4232 working you could try initializing it with DOS (CS4232C.EXE) and
658 You could usually use the same values than with DOS and/or Windows.
670 even if they are otherwise compatible with some other cards (like SB,
685 to me together with a list of the major IC chips (manufactured, model) to
689 do with these cards is to check if they emulate some other card or interface
698 Configuring sound driver (with Linux)
736 some drivers (like MPU401) may conflict with your SCSI controller and
759 the emulation if you want to use a true SB card together with PAS16
768 Enable this option also with PAS16 (changed since v3.5-beta9).
776 with these cards may cause trouble. However I don't currently know
781 Currently I don't have experiences with the GUS ACE so I don't
782 know what to answer with it.
784 - Be careful with this question. The MPU401 interface is supported
786 have their own driver for MPU401. Enabling the MPU401 option with
792 In MOST cases this MPU401 driver should only be used with "true"
798 of this separate MPU401 driver with these cards. As well
827 "nonstandard" feature and works only with very few cards (if any).
830 channels with cards that don't support this feature will prevent
836 cards made by Spea don't work properly with Linux.
837 Soundscape PnP as well as Ensoniq VIVO work only with the commercial
852 - This enables TB Maui specific initialization. Works with TB Maui
853 and TB Tropez (may not work with Tropez Plus).
887 the same settings with DOS/Windows and Linux is recommended. Using
901 a good idea to use the same values than with DOS/Windows. With SB and SB Pro
903 using different values with DOS and Linux is likely to cause troubles. The
921 and have different PnP IDs. There is no way to get two cards with the same
932 First of all: There are no SB16 clones. There are SB Pro clones with a
958 PAS16 has a SB emulation chip which can be used together with the native
963 With current driver versions it's also possible to use PAS16 together with
997 with DOS.
1014 If you have problems in recording with GUS MAX, you could try to use
1015 just one 8 bit DMA channel. Recording will not work with one DMA
1022 volume of "speaker" if you have problems with microphone feedback.
1027 GUS PnP (with RAM) is partially supported but it needs to be initialized using
1057 Even the PSS cards are compatible with SB, MSS and MPU401, you must not
1060 together with PSS if you have another card on the system).
1063 since it doesn't work concurrently with MSS. The driver loads also a
1068 distributed with the DOS/Windows drivers of the card (don't use the mt32.ld).
1071 partition containing the file with Linux.
1073 It's possible to load your own DSP algorithms and run them with the card.
1083 DMA numbers. Using the same values than with DOS/Win is a good idea. Don't
1105 cards made by Reveal don't work with Linux. They use older revision
1106 of the Soundscape chipset which is not fully compatible with
1121 !!!!! This is not required with OSS versions 3.5-beta6 and later !!!!
1142 The ssinit program needs the microcode file that comes with the DOS/Windows
1157 code files with higher numbers (.co2, .co3, etc.).
1159 NOTE! Ensoniq Soundscape VIVO is not compatible with other Soundscape cards.
1160 Currently it's possible to use it in Linux only with OSS/Linux
1167 Running ssinit with a wrong version of the sndscape.co? file is not
1191 Maui driver can be used with it).
1194 line3 mixer channel is turned too high. This happens at least with Shuttle
1206 NOTE! Cards having an OPTi 82C924/82C925 chip work with OSS/Free only in
1230 The Logitech SoundMan Wave (don't confuse this with the SM16 or SM Games) is
1243 (Don't enable the 'normal' MPU401 device as with some earlier driver
1255 with them.
1262 supports with these cards.
1264 There are some new Sound Galaxies in the market. I have no experience with
1274 with ES688).
1276 NOTE! ESS cards are not compatible with MSS/WSS so don't worry if MSS support
1277 of OSS doesn't work with it.
1288 ES1868 is a PnP chip which is (supposed to be) compatible with ESS1688
1289 probably works with OSS/Free after initialization using isapnptools.
1295 are compatible with SoundScape and some use the MAD16 chip. You may have
1321 that there is something wrong with the mouse port and sound at least on
1337 you compile this ACI driver together with the normal MAD16 support
1349 through toggling the record button for the wave controller with an
1353 ACI. This radio tuner is supported by the ACI driver together with the
1358 others. Even the v4l radio module benefits from it with a refined
1367 Bas van der Linden is using his PCM1-pro with a configuration that
1374 You need to configure the driver with MSS and OPL3 supports enabled.
1384 card which works with Linux, please inform me (or is anybody else
1395 First of all, there is an easy way to make most sound cards work with Linux.
1399 (ctrl-alt-del can be used in place of loadlin.exe but it doesn't work with
1400 new motherboards). This method works also with all/most PnP sound cards.
1402 Don't get fooled with SB compatibility. Most cards are compatible with
1403 SB but that may require a TSR which is not possible with Linux. If
1404 the card is compatible with MSS, it's a better choice. Some cards
1412 to all low level drivers and be tested too, maybe with multiple