Lines Matching refs:MSS
389 card (usually SB, MSS/WSS and/or MPU401). The following cards have native
419 compatible 16 bit mode. Usually it's MSS/WSS but it could also
466 Windows Sound System (MSS/WSS)
468 they managed to make it a standard. MSS compatible cards are based on
471 Currently most sound cards are based on one of the MSS compatible codec
473 MediaTrix AudioTrix Pro and TB Tropez (GUS MAX is not MSS compatible).
476 sign. Even if the card is not MSS compatible, it could be easy to write
477 support for it. Note also that most MSS compatible cards
479 in the driver. Also, some MSS compatible cards have native support.
480 Enabling the MSS support with these cards is likely to
482 enabling the MSS support.
511 different chip. OPL3-SA1 has support for MSS, MPU401 and SB Pro
516 use the standard MSS, MPU401 and OPL3 options with these chips and to
603 in the PnP mode. You will have to use them in MSS mode after having
690 such as SB, MSS and/or MPU401. In this case there is a chance to get the
824 have their own MSS support and enabling this option will cause a
826 Note! The MSS driver permits configuring two DMA channels. This is a
934 the 16 bit mode means MSS/WSS.
951 If your card is both SB and MSS compatible, I recommend using the MSS mode.
952 Most cards of this kind are not able to work in the SB and the MSS mode
953 simultaneously. Using the MSS mode provides 16 bit recording and playback.
1036 Configuring these cards is obvious (or it should be). With MSS
1038 most MSS compatible cards have it. However check that this is true
1057 Even the PSS cards are compatible with SB, MSS and MPU401, you must not
1059 program handles these options itself. (You may use the SB, MPU and MSS options
1062 The PSS driver enables MSS and MPU401 modes of the card. SB is not enabled
1063 since it doesn't work concurrently with MSS. The driver loads also a
1080 to the native AudioTrix driver. Don't enable MSS or MPU drivers.
1109 The SoundScape driver handles initialization of MSS and MPU supports
1130 and one DMA is used by the MSS codec. The second IRQ is required for the
1178 the driver. _Don't_ enable SB, MPU401 or MSS. However you will need the
1261 for all of the settings. Configure driver for MSS, MPU, SB/SB Pro and OPL3
1276 NOTE! ESS cards are not compatible with MSS/WSS so don't worry if MSS support
1374 You need to configure the driver with MSS and OPL3 supports enabled.
1404 the card is compatible with MSS, it's a better choice. Some cards
1405 don't work in the SB and MSS modes at the same time.