Lines Matching refs:and
18 This PCM device (it's the 4th PCM device (index 3!) and first subdevice
37 is mentioned in multiple controls, the signal is accumulated and can be wrapped
46 (this standard is used for connecting standalone DAC and ADC converters)
48 AC97 - a chip containing an analog mixer, DAC and ADC converters
52 and the DSP microcontroller can operate with the resulting sum.
57 This control is used to attenuate samples for left and right PCM FX-bus
58 accumulators. ALSA uses accumulators 0 and 1 for left and right PCM samples.
63 This control is used to attenuate samples for left and right PCM FX-bus
64 accumulators. ALSA uses accumulators 0 and 1 for left and right PCM samples.
70 This control is used to attenuate samples for left and right PCM FX-bus
71 accumulators. ALSA uses accumulators 0 and 1 for left and right PCM samples.
72 The result is mixed to mono signal (single channel) and forwarded to
77 This control is used to attenuate samples for left and right PCM FX-bus
78 accumulators. ALSA uses accumulators 0 and 1 for left and right PCM.
79 The result is mixed to mono signal (single channel) and forwarded to
85 These controls are used to attenuate samples for left and right PCM FX-bus
86 accumulator. ALSA uses accumulators 0 and 1 for left and right PCM.
92 This control is used to attenuate samples for left and right MIDI FX-bus
93 accumulators. ALSA uses accumulators 4 and 5 for left and right MIDI samples.
99 These controls are used to attenuate samples for left and right MIDI FX-bus
100 accumulator. ALSA uses accumulators 4 and 5 for left and right PCM.
106 This control is used to attenuate samples for left and right rear PCM FX-bus
107 accumulators. ALSA uses accumulators 2 and 3 for left and right rear PCM samples.
114 These controls are used to attenuate samples for left and right rear PCM FX-bus
115 accumulators. ALSA uses accumulators 2 and 3 for left and right rear PCM samples.
133 This control is used to attenuate samples for left and right front ADC PCM slots
143 This control is used to attenuate samples for left and right front ADC PCM slots
153 This control is used to attenuate samples from left and right IEC958 TTL
159 This control is used to attenuate samples from left and right IEC958 TTL
165 This control is used to attenuate samples from left and right zoom video
171 This control is used to attenuate samples from left and right zoom video
177 This control is used to attenuate samples from left and right IEC958 optical
183 This control is used to attenuate samples from left and right IEC958 optical
189 This control is used to attenuate samples from left and right IEC958 coaxial
195 This control is used to attenuate samples from left and right IEC958 coaxial
202 This control is used to attenuate samples from left and right I2S ADC
209 This control is used to attenuate samples from left and right I2S ADC
216 and center / LFE outputs are affected.
330 Execution and Audio Data Sequencing (Jan. 14, 1999)
347 system bus with prioritization and modification of bus transfers
348 in accordance with loop ends and minimum block sizes
355 defining interrupt register, polling GP registers, and invoking