Lines Matching refs:playback
17 (hw:0,1) is assigned to the second DAC for rear playback.
25 Please note that the CM8x38 DAC doesn't support continuous playback
48 playback should be routed there as default. If not, there is a
54 The "Exchange DAC" switch is used to exchange front and rear playback
61 The recent CM8738 chips support for the 4/6 multi-channel playback
70 formats, the 4/6-ch playback supports only the same condition for all
71 channels. Since the multi-channel playback mode uses both DACs, you
79 For programming the 4/6 channel playback, you need to specify the PCM
80 channels as you like and set the format S16LE. For example, for playback
110 The SPDIF playback and capture are done via the third PCM device
113 For playback with aplay, you can run like below:
123 The playback and capture over SPDIF use normal DAC and ADC,
124 respectively, so you cannot playback both analog and digital streams
143 "IEC958 Mix Analog" - Mix analog PCM playback and FM-OPL/3 streams and
177 can be toggled via IEC958 playback control, but usually you need to
196 There are Master, PCM, Synth, CD, Line, Mic and PC Speaker playback
197 volumes. Synth, CD, Line and Mic have playback and capture switches,
201 - PCM playback switch
205 - Aux playback volume/switch and capture switch