Lines Matching refs:device_setup
83 "device_setup".
140 parameter called "device_setup" (this parameter was introduced in kernel
151 When initialized with "device_setup=0x00", the snd-usb-audio module has
161 * device_setup=0x01
167 * device_setup=0x11
189 * device_setup=0x09
195 * device_setup=0x19
202 * device_setup=0x0D or 0x10
217 * device_setup=0x03
225 3.2.2 - How to use the device_setup parameter
232 # modprobe snd-usb-audio index=1 device_setup=0x09
237 options snd-usb-audio index=1 device_setup=0x09
242 * Correct initialization on the device requires that device_setup is given to
248 correct device_setup parameter and then (and only then) turn on the device again.
255 - change the device_setup parameter by changing the device_setup
266 3.2.3.1 - Audiophile USB's device_setup structure
268 If you want to understand the device_setup magic numbers for the Audiophile
272 The device_setup is one byte long and its structure is the following:
282 - it MUST be set if device_setup is initialized
305 * there is no check on the value you will give to device_setup
372 When device_setup is given as a parameter to the snd-usb-audio module, the
375 corresponding to device_setup from being registered in the driver.