Lines Matching refs:samples

42 This control is used to attenuate samples for left and right front PCM FX-bus
44 samples for 5.1 playback. The result samples are forwarded to the front DAC PCM 
49 This control is used to attenuate samples for left and right surround PCM FX-bus
51 samples for 5.1 playback. The result samples are forwarded to the surround DAC PCM 
56 This control is used to attenuate samples for center PCM FX-bus accumulator.
68 This control is used to attenuate samples for left and right PCM FX-bus
69 accumulators. ALSA uses accumulators 0 and 1 for left and right PCM samples for
70 stereo playback. The result samples are forwarded to the front DAC PCM slots 
75 This control is used to attenuate samples for left and right PCM FX-bus
82 This control is used to attenuate samples for left and right MIDI FX-bus
83 accumulators. ALSA uses accumulators 4 and 5 for left and right MIDI samples.
84 The result samples are forwarded to the front DAC PCM slots of the AC97 codec.
88 These controls are used to attenuate samples for left and right MIDI FX-bus
95 This control is used to attenuate samples for left and right Mic input.
96 For Mic input is used AC97 codec. The result samples are forwarded to 
102 This control is used to attenuate samples for left and right Mic input.
108 This control is used to attenuate samples from left and right IEC958 TTL
109 digital inputs (usually used by a CDROM drive). The result samples are
114 This control is used to attenuate samples from left and right IEC958 TTL
115 digital inputs (usually used by a CDROM drive). The result samples are
120 This control is used to attenuate samples from left and right IEC958 optical
121 digital input. The result samples are forwarded to the front DAC PCM slots
126 This control is used to attenuate samples from left and right IEC958 optical
127 digital inputs. The result samples are forwarded to the ADC capture FIFO
132 This control is used to attenuate samples from left and right I2S ADC
133 inputs (on the AudigyDrive). The result samples are forwarded to the front
138 This control is used to attenuate samples from left and right I2S ADC
139 inputs (on the AudigyDrive). The result samples are forwarded to the ADC
144 This control is used to attenuate samples from left and right I2S ADC
145 inputs from Philips ADC. The result samples are forwarded to the front
151 This control is used to attenuate samples from left and right I2S ADC
152 inputs Philips ADC. The result samples are forwarded to the ADC
157 This control is used to attenuate samples from left and right I2S ADC
158 inputs (on the AudigyDrive). The result samples are forwarded to the front
163 This control is used to attenuate samples from left and right I2S ADC
164 inputs (on the AudigyDrive). The result samples are forwarded to the ADC
170 This control is used to attenuate samples for left and right front speakers of
176 This control is used to attenuate samples for left and right surround speakers of
191 This control turns the tone control on or off. The samples for front, rear
197 When the tone control code is activated, the samples are always modified.
203 When the tone control code is activated, the samples are always modified.
208 This control is used to attenuate samples for front, surround, center and 
213 If this switch is on, then the samples for the IEC958 (S/PDIF) digital
215 PCM samples are taken.
329                         digital sound samples can be concurrently loaded
335 …    US 6138207      Interpolation looping of audio samples in cache connected to    (Oct. 24, 2000)