Lines Matching refs:and

23 is mentioned in multiple controls, the signal is accumulated and can be wrapped 
32          (this standard is used for connecting standalone DAC and ADC converters)
34 AC97   - a chip containing an analog mixer, DAC and ADC converters
38          and the DSP microcontroller can operate with the resulting sum.
42 This control is used to attenuate samples for left and right front PCM FX-bus
43 accumulators. ALSA uses accumulators 8 and 9 for left and right front PCM 
49 This control is used to attenuate samples for left and right surround PCM FX-bus
50 accumulators. ALSA uses accumulators 2 and 3 for left and right surround PCM 
68 This control is used to attenuate samples for left and right PCM FX-bus
69 accumulators. ALSA uses accumulators 0 and 1 for left and right PCM samples for
75 This control is used to attenuate samples for left and right PCM FX-bus
76 accumulator. ALSA uses accumulators 0 and 1 for left and right PCM.
82 This control is used to attenuate samples for left and right MIDI FX-bus
83 accumulators. ALSA uses accumulators 4 and 5 for left and right MIDI samples.
88 These controls are used to attenuate samples for left and right MIDI FX-bus
89 accumulator. ALSA uses accumulators 4 and 5 for left and right PCM.
95 This control is used to attenuate samples for left and right Mic input.
102 This control is used to attenuate samples for left and right Mic input.
108 This control is used to attenuate samples from left and right IEC958 TTL
114 This control is used to attenuate samples from left and right IEC958 TTL
120 This control is used to attenuate samples from left and right IEC958 optical
126 This control is used to attenuate samples from left and right IEC958 optical
132 This control is used to attenuate samples from left and right I2S ADC
138 This control is used to attenuate samples from left and right I2S ADC
144 This control is used to attenuate samples from left and right I2S ADC
151 This control is used to attenuate samples from left and right I2S ADC
157 This control is used to attenuate samples from left and right I2S ADC
163 This control is used to attenuate samples from left and right I2S ADC
169 All stereo signals are mixed together and mirrored to surround, center and LFE.
170 This control is used to attenuate samples for left and right front speakers of
175 All stereo signals are mixed together and mirrored to surround, center and LFE.
176 This control is used to attenuate samples for left and right surround speakers of
181 All stereo signals are mixed together and mirrored to surround, center and LFE.
186 All stereo signals are mixed together and mirrored to surround, center and LFE.
192 and center / LFE outputs are affected.
208 This control is used to attenuate samples for front, surround, center and 
319                         Execution and Audio Data Sequencing (Jan. 14, 1999)
336                         system bus with prioritization and modification of bus transfers
337                         in accordance with loop ends and minimum block sizes
344                         defining interrupt register, polling GP registers, and invoking