Lines Matching refs:dma2
313 dma2 - DMA # for WSS capture (0,1), -1 = disabled (default)
327 If dma2 is specified and different from dma1, the card will operate in
328 full-duplex mode. When dma1=3, only dma2=0 is valid and the only way to
331 Generic settings are "port=0x220 wss_port=0x530 irq=10 dma1=1 dma2=0
347 dma2 - DMA # for WSS capture (0,1), -1 = disabled (default)
361 If dma2 is specified and different from dma1, the card will operate in
362 full-duplex mode. When dma1=3, only dma2=0 is valid and the only way to
365 Generic settings are "port=0x220 wss_port=0x530 irq=10 dma1=1 dma2=0
471 dma2 - second DMA # for CS4231 chip
496 dma2 - second DMA # for CS4236 chip (0,1,3), -1 = disable
735 dma2 - first DMA # for ES-18xx chip (0,1,3)
739 When dma2 is equal with dma1, the driver works as half-duplex.
810 dma2 - DMA # for GF1 chip (1,3,5,6,7,-1=disable)
844 dma2 - DMA # for GF1 chip (1,3,5,6,7,-1=disable)
1184 dma2 - DMA # for InterWave chip (0,1,3,5,6,7,-1=disable)
1208 dma2 - DMA # for InterWave chip (0,1,3,5,6,7,-1=disable)
1302 dma2 - 2nd dma # (0,1)
1484 dma2 - second DMA # for Yamaha OPL3-SA chip (0,1,3), -1 = disable
1525 dma2 - second DMA # for WSS chip (0,1,3)
1544 dma2 - second DMA # for WSS chip (0,1,3)
1744 dma2 - 2nd DMA # (PnP setup, -1 to disable)
1791 dma2 - DMA2 # for CS4232 PCM interface.