Lines Matching refs:by

23 RocketPort ISA and RocketModem II PCI boards currently are only supported by
26 The RocketPort ISA board requires I/O ports to be configured by the DIP
57 The RocketPort/RocketModem serial ports installed by this driver are assigned
64 manually by entering "modprobe rocket".  To have the module loaded automatically
87 You must assign and configure the I/O addresses used by the ISA Rocketport
88 card before installing and using it.  This is done by setting a set of DIP
105 0x2C0h, 0x300h, 0x340h, 0x380h, 0x3C0h.  The I/O address used by the
118 The I/O address range used by any of the RocketPort cards must not
121 address ranges which may be in use by other devices in your system.
123 identifying what I/O addresses are being used by devices on your
129 the first 4 bytes of that range are used by the first board.  You would
152 4    3    2    1     Used by the First Card