Lines Matching refs:should

7 driver.  It is not complete, any questions you have should be directed to
77 	this function should return TIOCSER_TEMT, otherwise return 0.
78 	If the port does not support this operation, then it should
94 	If the appropriate bit is set, the signal should be driven
95 	active.  If the bit is clear, the signal should be driven
104 	of the outputs should not be returned, since the core keeps
105 	track of their state.  The state information should include:
111 	the port does not support CTS, DCD or DSR, the driver should
113 	not available, the signal should not be indicated as active.
124 	The driver should stop transmitting characters as soon as
162 	interrupts should be disabled when the shutdown method is
171 	nonzero, the break signal should be transmitted.  The signal
172 	should be terminated when another call is made with a zero
181 	state.  Enable the port for reception.  It should not activate
191 	effect, and free any interrupt resources.  It should not disable
262 	This function should not be used to grab any resources.
288 	If any fail, no resources should be registered when this function
289 	returns, and it should return -EBUSY on failure.
298 	port->type should be set to the type found, or PORT_UNKNOWN if
302 	which should be probed using standard kernel autoprobing techniques.
326 	this should not request interrupts.
333 	port.  It can and should block until there is space in the TX FIFO.
341 	port.  If data is available, it should be returned; otherwise
342 	the function should return NO_POLL_CHAR immediately.
394 	Locking: port->lock should be held.
401 	drv->port should be NULL, and the per-port structures should be