Lines Matching refs:ID
130 C = Controller, B = Bus, T = Target SCSI ID, U = Unit SCSI LUN.)
155 Idx ID LUN Prty Sync DsCn SndS TagQ NegoPeriod SyncSpeed SyncOffs MaxCmd
169 Idx is the device index (just a consecutive number for the driver), ID and
170 LUN are the SCSI ID and LUN, Prty means Parity checking, Sync synchronous
206 must match the ID and LUN given. If you give "-" as parameter, it is
217 The first three numbers, "0 0 0" (Device index 0, SCSI ID 0, SCSI LUN 0),
219 would be sufficient to use the index or both SCSI ID and LUN, but I chose
234 (Idx). ADD takes the SCSI ID and LUN.
263 adapter ID than 7.
285 * AdaptID: The SCSI ID of the host adapter. Must be in the range 0..7
330 would set the adapter ID to 6, max. speed to 6.7 MHz, enable all device