Lines Matching refs:number

40 number (bits 5 and 6). The number of modes can be changed by changing
65 limits). Both the auto-rewind (minor equals device number) and
66 non-rewind devices (minor is 128 + device number) are implemented.
124 remaining bits define the tape device number. This numbering is
125 backward compatible with the numbering used when the minor number was
134 is the tape number and y a character corresponding to the mode (none, l, m,
174 1.  in_flight - The number of I/Os currently outstanding to this device.
179 3.  other_cnt - The number of I/Os issued to the tape drive other than read or
182 4.  read_byte_cnt - The number of bytes read from the tape drive.
183 5.  read_cnt - The number of read requests issued to the tape drive.
186 7.  write_byte_cnt - The number of bytes written to the tape drive.
187 8.  write_cnt - The number of write requests issued to the tape drive.
190 10. resid_cnt - The number of times during a read or write we found
232 - the number of pages in the transfer exceeds the number of
281 allocated so that as many segments as possible are used but the number
284 max_sg_segs) and the number of segments used in phases 1 and 2
286 number of scatter/gather segments allowed for the SCSI adapter is not
287 exceeded if it is smaller than the maximum number of scatter/gather
288 segments specified. If the maximum number allowed for the SCSI adapter
289 is smaller than the number of segments used in phases 1 and 2,
296 is finished and the number of bytes is returned. The next write
298 the next write is allowed to proceed and, if successful, the number of
299 bytes is returned. After this, -1 and the number of bytes are
306 The buffer size, write threshold, and the maximum number of allocated buffers
312 max_sg_segs=xxx		   the maximum number of scatter/gather
326 with 'st.'. For instance, to set the maximum number of scatter/gather
328 number of scatter/gather segments).
346   dd is the maximum number of scatter/gather segments
393 	MT_ST_HPLOADER_OFFSET + 6, the number x is used sent to the
442 	     MT_ST_SCSI2LOGICAL the logical block number is used in
481 	   non-zero number, and this number is not 0xff, the number is
502 	   given the number of the sense data byte (the lowest eight
522         The file number and block number within file are returned. The
525         The number of recovered errors since the previous status call
540 The maximum number of tape devices is determined by the define
552 filemarks. With this method the file number in the status is
555 number will be invalid.