Lines Matching refs:drives
26 QIC-drives). The result is that any tape can be read, writing can be
115 The tape driver currently supports up to 2^17 drives if 4 modes for
156 The st driver maintains statistics for tape drives inside the sysfs filesystem.
264 this read command. Should be disabled for those drives that don't like
384 for SCSI-1 drives and SCSI-2 seek for SCSI-2 drives. The file and
397 SCSI mode page 15. Note that some drives other methods for
398 control of compression. Some drives (like the Exabytes) use
399 density codes for compression control. Some drives use another
401 driver. Some drives without compression capability will accept
443 the MTSEEK and MTIOCPOS for SCSI-2 drives instead of
499 is found from the extended sense data. Many drives set one or
517 Tandberg-compatible QFA for SCSI-1 drives and the SCSI-2
518 command for the SCSI-2 drives.
547 finished. The drives and SCSI adapters should handle this condition