Lines Matching refs:with

6 with "Type: Medium Changer" in /proc/scsi/scsi.
8 This is for *real* Jukeboxes.  It is *not* supported to work with
49 I implemented the driver as character device driver with a NetBSD-like
52 should be source code compatible with NetBSD. So if there is any
54 it should work with this driver too.
66 I test and use the driver myself with a 35 slot cdrom jukebox from
67 Grundig.  I got some reports telling it works ok with tape autoloaders
68 (Exabyte, HP and DEC).  Some People use this driver with amanda.  It
69 works fine with small (11 slots) and a huge (4 MOs, 88 slots)
70 magneto-optical Jukebox.  Probably with lots of other changers too, most
76 changer command set should work out-of-the-box with this driver.  If it
84 This is a character device with major number is 86, so use
95      (replace ID with the SCSI-ID of the device)
96   2) boot the kernel with "max_scsi_luns=1" on the command line
103 If you insmod the driver with "insmod debug=1", it will be verbose and
104 prints a lot of stuff to the syslog.  Compiling the kernel with
109 You can display these messages with the dmesg command (or check the
110 logfiles).  If you email me some question because of a problem with the