Lines Matching refs:order

23       8.4  Set order type for tagged command
102   chips in order to gain advantage of new features, as LOAD/STORE instructions 
240 In order to really gain advantage of this feature, devices must have 
310 checking.  These features must be enabled in order to ensure safe data
333 In order to display profiling information, just enter:
476 8.4 Set order type for tagged command
478     setorder <order>
480     order:     3 possible values:
511     data transferred reaches 1000 GB in order to avoid overflow.
525     Do not specify any flag in order to reset the flag. For example:
612     Tekram cards. Enables setting the boot order of host adaptors
613     to something other than the default order or "reverse probe" order. 
647 It will be used in the future in order to allow a per controller setup.
793         revprob:n   probe chip ids from the PCI configuration in this order:
795         revprob:y   probe chip ids in the reverse order.
806     Use 'pcifix:7' in order to allow the driver to fix up all PCI features.
903 to your boot setup command in order to check the actual setup the driver is 
914 Use 'pcifix:3' in order to allow the driver to fix both PCI features.
954     Boot order                         N                   Y
965 In order to speed up the system boot, for each device configured without 
973 The 'nvram' boot option can be entered in hexadecimal form in order 
1146 New driver versions are made available separately in order to allow testing 
1176 has one or more controllers of this family, it may happen that the order 
1180 define the order the BIOS will scan the scsi boards. The driver attaches 
1185 - Ask the driver to probe chip ids in reverse order from the boot command
1256 appropriate mailing lists or news-groups.  Send me a copy in order to
1459 The Symbios NVRAM also holds data on the boot order of host adaptors in a
1460 system with more than one host adaptor. This enables the order of scanning
1465 this only changes the order of detection of different types of cards. The
1466 NVRAM boot order settings can do this as well as change the order the same
1581                    |        0x00000001= scan order hi->low
1596 boot order set by order of the devices in this table
1808 In order to support NCR chips on a Big Endian architecture the driver has to