Lines Matching refs:all

28       8.9  Reset all logical units of a target
29       8.10 Abort all tasks of all logical units of a target
41              10.2.8  Negotiate synchronous with all devices
98 - ncr53c8xx generic driver that supports all the SYM53C8XX family including 
144 The following features are supported for all chips:
221 - SYM53C815 all revisions
232 driver to use normal I/O in all cases.
279 - target 2  all luns  on controller 0 --> 15
280 - target 3  all luns  on controller 0 --> 15
281 - target 4  all luns  on controller 0 -->  7
283 - all other target/lun                -->  4
441 Using "all" for "<target>" parameter with the commands below will
442 apply to all targets of the SCSI chain (except the controller).
481                simple: use SIMPLE TAG for all operations (read and write)
482                ordered: use ORDERED TAG for all operations
528     - setflag all
529       will allow disconnection for all devices on the SCSI bus.
539 8.9 Reset all logical units of a target
547 8.10 Abort all tasks of all logical units of a target
552     The driver will try to send a ABORT message to all the logical units 
559 If the firmware of all your devices is perfect enough, all the
569     suffers no performance loss with this option since all IO is memory
586     Force synchronous negotiation for all SCSI-2 devices.
592     you can answer "y". Then, all SCSI devices will never disconnect the bus 
598     If all the boards of your system are genuine SYMBIOS boards or use
660 installs the sym53c8xx driver on all adapters except the one at IO port 
709       - all other logical units (all targets, all controllers) -> 10 commands.
719   In all cases, the driver will use the minimum transfer period supported by 
722 10.2.8  Negotiate synchronous with all devices
806     Use 'pcifix:7' in order to allow the driver to fix up all PCI features.
814         0x02   ignore NVRAM "Synchronous negotiation" parameters for all devices
815         0x04   ignore NVRAM "Wide negotiation"  parameter for all devices
816         0x08   ignore NVRAM "Scan at boot time" parameter for all devices
925 Not all PCI bioses set the PCI cache line register and the PCI write and 
946 When this option is enabled, the driver tries to detect all boards using 
978       0x02   ignore NVRAM "Synchronous negotiation" parameters for all devices
979       0x04   ignore NVRAM "Wide negotiation"  parameter for all devices
980       0x08   ignore NVRAM "Scan at boot time" parameter for all devices
987 The ncr53c8xx always tries to attach all the controllers. Option 0x80 has 
997 The driver just reads SCSI lines and checks all lines read FALSE except RESET.
1091 	If defined, synchronous negotiation is tried for all SCSI-2 devices.
1270 - echo "setsync all 25" >/proc/scsi/ncr53c8xx/0
1271   Will enable fast synchronous data transfer negotiation for all targets.
1362 and using 4 clock divisors and so applies to all NCR53C8XX chips in fast 
1474 used together with the Symbios cards using all their features, including
1754                                                            2 - all