Lines Matching refs:code
6 ** 1. Message 0 --> InitThread message and return code
19 ** offset 0xa00 : for inbound message code message_rwbuffer
21 ** offset 0xa00 : for outbound message code message_rwbuffer
52 ** 1 : Error, error code in AdapStatus/DevStatus/SenseData
65 ** 9. Message0 message code :
68 ** ->offset 0xa00 :for outbound message code message_rwbuffer
82 ** ->offset 0xa00 :for inbound message code message_rwbuffer
94 ** ->offset 0xa00 : for inbound message code message_rwbuffer
113 ** command code, data and checksum byte
122 ** (C) 3rd byte : command code
124 ** depends on command code
127 ** 3. Command code and associated data
129 ** The following are command code defined in raid controller Command
130 ** code 0x10--0x1? are used for system level management,
133 ** Command code 0x20--0x?? always check the password,
184 ** byte 2 : command code 0x10
190 ** byte 2 : command code 0x11
196 ** byte 2 : command code 0x12
202 ** byte 2 : command code 0x13
206 ** byte 2 : command code 0x14
211 ** byte 2 : command code 0x15
216 ** byte 2 : command code 0x17
222 ** byte 2 : command code 0x18
230 ** byte 2 : command code 0x19
233 ** byte 2 : command code 0x1a
237 ** byte 2 : command code 0x1b
257 ** byte 2 : command code 0x20
268 ** byte 2 : command code 0x20
293 ** byte 2 : command code 0x21
317 ** byte 2 : command code 0x22
337 ** byte 2 : command code 0x23
384 ** byte 2 : command code 0x24
387 ** byte 2 : command code 0x30
390 ** byte 2 : command code 0x31
394 ** byte 2 : command code 0x32
399 ** byte 2 : command code 0x33
403 ** byte 2 : command code 0x34
407 ** byte 2 : command code 0x35
411 ** byte 2 : command code 0x36
415 ** byte 2 : command code 0x37
428 ** byte 2 : command code 0x38
431 ** byte 2 : command code 0x39
436 ** byte 2 : command code 0x40
448 ** byte 2 : command code 0x41
460 ** byte 2 : command code 0x42
464 ** byte 2 : command code 0x43
471 ** byte 2 : command code 0x50
476 ** byte 2 : command code 0x51
480 ** byte 2 : command code 0x52
490 ** byte 2 : command code 0x53
494 ** byte 2 : command code 0x54
498 ** byte 2 : command code 0x55
502 ** byte 2 : command code 0x60
522 ** byte 2 : command code 0x61
540 ** byte 2 : command code 0x62
544 ** byte 2 : command code 0x63
548 ** byte 2 : command code 0x64
556 ** <1> If length == 1 ==> 1 byte status code
572 ** and the contents depends on the command code