Lines Matching refs:PCI

61 the BT-948 PCI Ultra SCSI Host Adapter, and then again for the BT-958 PCI Wide
72 Linux community, and I am now working on a Linux driver for the DAC960 PCI RAID
177 o PCI Configuration Support
179   On PCI systems running kernels compiled with PCI BIOS support enabled, this
180   driver will interrogate the PCI configuration space and use the I/O port
183   driver.  On PCI systems it is also recommended that the AutoSCSI utility be
206 FlashPoint Series PCI Host Adapters:
220 BT-948	    PCI		Ultra SCSI-3
221 BT-958	    PCI		Wide Ultra SCSI-3
222 BT-958D	    PCI		Wide Differential Ultra SCSI-3
226 BT-946C	    PCI		Fast SCSI-2
227 BT-956C	    PCI		Wide Fast SCSI-2
228 BT-956CD    PCI		Wide Differential Fast SCSI-2
292 The BT-948/958/958D PCI Ultra SCSI Host Adapters have some features which may
295 o PCI I/O Port Assignments
298   recognize the PCI I/O port assignments made by the motherboard's PCI BIOS.
301   the PCI I/O port assignments, so this is the preferred configuration.
315 o PCI Slot Scanning Order
317   In systems with multiple BusLogic PCI Host Adapters, the order in which the
318   PCI slots are scanned may appear reversed with the BT-948/958/958D as
321   on which disk is the boot device, which requires that they recognize the PCI
322   host adapters in the same order.  The motherboard's PCI BIOS provides a
323   standard way of enumerating the PCI host adapters, which is used by the Linux
324   kernel.  Some PCI BIOS implementations enumerate the PCI slots in order of
329   PCI slots in order of increasing bus number and device number regardless of
330   the PCI BIOS enumeration, and requires that their scheme be supported by the
336   the "Use Bus And Device # For PCI Scanning Seq." option to OFF.
338   This driver will interrogate the setting of the PCI Scanning Sequence option
371   The "IO:" option specifies an ISA I/O Address to be probed for a non-PCI
386   Addresses and therefore only PCI MultiMaster and FlashPoint Host Adapters
391   The "NoProbePCI" options disables the interrogation of PCI Configuration
393   well as PCI Multimaster Host Adapters that have their ISA Compatible I/O
398   The "NoSortPCI" option forces PCI MultiMaster Host Adapters to be
399   enumerated in the order provided by the PCI BIOS, ignoring any setting of
400   the AutoSCSI "Use Bus And Device # For PCI Scanning Seq." option.
405   before FlashPoint Host Adapters.  By default, if both FlashPoint and PCI
408   by the first PCI MultiMaster Host Adapter, in which case MultiMaster Host