Lines Matching refs:you

8 Since the 53c700 must be interfaced to a bus, you need to wrapper the
12 The comments in the 53c700.[ch] files tell you which parts you need to
31 driver, you need to know three things about the way the chip is wired
38 Optionally, you may also need to know other things, like how to read
42 Usually you can find items 2. and 3. from general spec. documents or
65 In the detect routine, you need to allocate a struct
67 default values for everything are 0).  Then you must fill in the
68 parameters that matter to you (see below), plumb the NCR_700_intr
74 In the release routine, you must free the NCR_700_Host_Parameters that
75 you allocated, call the corresponding release_*_region and free the
81 In general, you should just plumb the card's interrupt line in with 
88 NCR_700_intr() directly.  However, you should only really do this if
89 you have a card with more than one chip on it and you can read a