Lines Matching refs:area

183 The driver defines three areas on the 3270 screen:  the log area, the
184 input area, and the status area.
186 The log area takes up all but the bottom two lines of the screen.  The
188 down.  When it fills, the status area changes from "Linux Running" to
192 The input area extends from the beginning of the second-to-last screen
193 line to the start of the status area.  You type commands in this area
196 The status area initializes to "Linux Running" to give you a warm
197 fuzzy feeling.  When the log area fills up and output awaits, it
201 the input area to toggle between "Linux More..." and "Linux Holding",
211 Other things you may do when the log area fills up are:  hit PA2 to
212 clear the log area and write more output to it, or hit CLEAR to clear
213 the log area and the input area and write more output to the log area.
220 the same thing from the input area, by typing "^C" and hitting ENTER.
222 PA2 causes the log area to be cleared.  If output awaits, it is then
223 written to the log area.
240 command stack (default depth 20) and displayed in the input area.  You
242 command is entered into the stack only when the input area is not made