Lines Matching refs:an

28 Each of these components is represented in the subsystem by an associated data
39 host device ID that is valid when a master port is configured as an enumerating
59 switch is defined by an internal routing table. A switch is presented in the
101 an enumeration and/or discovery routine may be called automatically or
120 several methods to initiate an enumeration and/or discovery process:
140   endpoints have been successfully booted, an enumeration process shall be
141   started first by issuing a user-space command, after an enumeration is
145   user space. After an enumeration/discovery module is loaded, a network scan
147   Similar to the option (b) above, an enumerator has to be started first.
150   initialization routine. In this case an enumerating module shall be loaded
153 When a network scan process is started it calls an enumeration or discovery
203 to be started before an enumeration starts to ensure that all RapidIO
222 an enumeration or discovery process on specific mport device, a user needs to
234 This is an original enumeration/discovery method which is available since
253 If the device is an endpoint, a unique device ID is assigned to it and its value
256 If the device is a switch, the enumerator allocates an additional rio_switch
262 device ID; it relies on hopcount and routing for device ID of an attached
272 management notification mechanism to identify a device that is reporting an
290 about RapidIO network structure and are building an internal map of discovered
296 an agent skips RapidIO discovery and continues with remaining kernel
307 devices before an enumeration/discovery process can be started. Normally,
309 an enumerator to a specified mport device (or devices). The basic enumerator