Lines Matching refs:traffic

66 all traffic types, but lacking in small packet performance and latency.
71 it dynamically adjusts the InterruptThrottleRate value based on the traffic
72 that it receives. After determining the type of incoming traffic in the last
74 for that traffic.
76 The algorithm classifies the incoming traffic every interval into
78 adjusted to suit that traffic type the best. There are three classes defined:
79 "Bulk traffic", for large amounts of packets of normal size; "Low latency",
80 for small amounts of traffic and/or a significant percentage of small
82 minimal traffic.
85 for traffic that falls in class "Bulk traffic". If traffic falls in the "Low
93 70000 for traffic in class "Lowest latency".
96 RX traffic.  If the bytes per second rate is approximately equal, the
98 traffic is mostly transmit or mostly receive, the interrupt rate could
103 for bulk throughput traffic.
133 properly tuned for specific network traffic.  Increasing this value adds
135 of TCP traffic.  If the system is reporting dropped receives, this value
155 along with RxIntDelay, may improve traffic throughput in specific network
165 efficiency if properly tuned for specific network traffic.  If the
178 along with TxIntDelay, may improve traffic throughput in specific
227 you have a machine with a BMC enabled but cannot receive IPMI traffic after