Lines Matching refs:can

28 that you need it, in general you won't and it can cause ifconfig to
44 You can set a DECnet address on the kernel command line for compatibility
51 can be used to loop back to the local machine. Of course this does not
73 using /proc/sys/net/decnet/conf/<dev>/forwarding. This file can be
76 There are also equivalent options for modules. The node address can
77 also be set through the /proc/sys/net/decnet/ files, as can other system
84 FTP sites called dn2ethaddr which can compute the correct ethernet
85 address to use. The address can be set by ifconfig either before or
86 at the time the device is brought up. If you are using RedHat you can
94 DECnet address which matches to be added to the interface (which you can
97 The default device for routing can be set through the /proc filesystem
105 ethernet card which has been autoconfigured as described above. You can
133 5) How can I tell if its working ?
159      which can be obtained from the above ftp sites as well as the
162      network, and see if you can obtain the same results.
168 you can do to help me work out exactly what it is that is wrong. Useful
173  - How far though the above set of tests can you get ?
179  - How can the problem be reproduced ?
198 significant processor time and bus bandwidth can be used up on a busy
219 list that you can join, details are at: