Lines Matching refs:configuration
71 such, the configuration procedures differ somewhat between the two types of
147 Utility if you want to change the adapter's configuration in EEPROM.
150 configuration parameters on the command-line to override the EEPROM's settings
151 or for interface configuration when an EEPROM is not used. (CS8920-based
157 installing a CS8900-based adapter and the default configuration is acceptable.)
175 You should only change the default configuration settings if conflicts with
176 another adapter exists. To change the adapter's configuration, run the
207 with the 'modprobe' command. Many of the adapter's configuration parameters can
210 configuration when an EEPROM is not used.
218 configuration options are available on the command line:
239 will override the corresponding configuration value stored in
259 e) The minimum command-line configuration required if an EEPROM is
281 determine configuration information which is passed to a driver
282 module when it is loaded. All the configuration options which are
381 test the functionality of the adapter with the hardware configuration you have
396 2.) The adapter's current configuration is displayed. Hit the ENTER key to
408 assigned during hardware configuration. The following tests are performed:
526 diagnostics self-test to ensure the new configuration is free of conflicts
574 2.) Adapter configuration