Lines Matching refs:session

50 Establishing a MBIM IP session reequires at least these actions by the
163 mapped to MBIM IP session 0.
170 subdevices of the master wwanY device, mapping MBIM IP session Z to
181 For example, adding a link for a MBIM IP session with SessionId 3:
186 IP session 3.
194 device, mapping MBIM DSS session A to VLAN ID (256 + A) for all values
203 assumption is that an userspace application initiating a DSS session
235 map frames to the correct DSS session and adding 18 byte VLAN ethernet
238 unnecessary copying of unrelated IP session data to userspace.  For
261 Tagged IP session 0 VLAN
263 As described above, MBIM IP session 0 is treated as special by the
269  - no IPS or DSS session can use a frame size greater than the MTU on
270    IP session 0
271  - no IPS or DSS session can be in the up state unless the network
272    device representing IP session 0 also is up
275 session 0 to a VLAN subdevice, similar to all other IP sessions.  This
277 4094.  The driver will then immediately start mapping MBIM IP session