Lines Matching refs:switches

456 		vs. just updating a switch or set of switches (which
619 		Most switches will require some type of configuration
1667 destined to link local mac addresses (which switches/bridges are not
1799 The nomenclature for such a group differs between switches, it may be
2127 links or switches between the host and the rest of the world.  The
2149 	With multiple switches, the configuration of bonding and the
2169 switches (ISL, or inter switch link), and multiple ports connecting to
2182 	the switches have an ISL and play together well.  If the
2190 	switches are not connected (no ISL), and the networks beyond
2215 	Note, also, that of late many switches now support a functionality
2223 suitable switches.
2329 	Many switches do not support any modes that stripe traffic
2437 	Multiple switches may be utilized to optimize for throughput
2457 	In this configuration, the switches are isolated from one
2460 performance, for example), using multiple smaller switches can be more
2462 hosts, three 24 port switches can be significantly less expensive than
2498 	Some switches exhibit undesirable behavior with regard to the
2501 	First, when a link comes up, some switches may indicate that
2510 	Second, some switches may "bounce" the link state one or more
2526 switches take a long time to go into backup mode, it may be desirable
2558 is a side effect of how many switches update their MAC forwarding
2568 switches exhibit this, and some do not.  On switches that display this
2570 most Cisco switches, the privileged command "clear mac address-table
2578 with particular switches or other devices.
2621 JS20 will be connected to different internal switches (in the
2736 7.  Which switches/systems does it work with?
2742 trunking).  Most managed switches currently available have such
2743 support, and many unmanaged switches as well.
2752 switches currently available support 802.3ad.