Lines Matching refs:multiple
22 multiple network interfaces into a single logical "bonded" interface.
367 Validation is useful in network configurations in which multiple
371 generated by the multiple bonding instances will fool the standard
421 value should be a multiple of the miimon value; if not, it
422 will be rounded down to the nearest multiple. The default
482 when multiple ports are programmed with the same MAC
809 should be a multiple of the miimon value; if not, it will be
810 rounded down to the nearest multiple. The default value is 0.
885 traffic to a particular network peer to span multiple
887 multiple slaves.
1034 Before editing, the file will contain multiple lines, and will look
1056 network configuration system will correctly start multiple instances
1099 system if you have multiple bonding devices.
1151 handling multiple bonding devices. All that is necessary is for each
1155 multiple bonding devices with identical parameters, create multiple
1236 is the proper syntax to specify multiple targets. When specifying
1272 Enterprise Linux 5 support multiple bonding interfaces by simply
1276 not support this method for specifying multiple bonding interfaces; for
1341 This section contains information on configuring multiple
1343 initialization scripts lack support for configuring multiple bonds.
1345 If you require multiple bonding devices, but all with the same
1349 To create multiple bonding devices with differing options, it is
1354 provide multiple instances of bonding with differing options is to load
1355 the bonding driver multiple times. Note that current versions of the
1361 To load multiple instances of the module, it is necessary to
1363 requires that every loaded module, even multiple instances of the same
1364 module, have a unique name). This is accomplished by supplying multiple
1394 to configure multiple bonds with differing parameters (as they are older
1406 Use of the sysfs interface allows you to use multiple bonds
1408 It also allows you to use multiple, differently configured bonds when
1629 Any interface that needs a queue_id set should set it with multiple calls
1631 distributions that allow configuration via initscripts, multiple 'queue_id'
2136 connected via multiple physical links, then there is no availability
2149 With multiple switches, the configuration of bonding and the
2150 network changes dramatically. In multiple switch topologies, there is
2169 switches (ISL, or inter switch link), and multiple ports connecting to
2206 In general, however, in a multiple switch topology, the ARP
2210 the ARP monitor should be configured with multiple targets (at least
2262 multiple physical links is, for purposes of configuring bonding, the
2307 TCP/IP connection to stripe traffic across multiple
2401 "local" network configuration, this mode balances multiple
2460 performance, for example), using multiple smaller switches can be more
2562 the interfaces attached to the bond may occupy multiple ports on a
2564 ports, the bond device receives multiple copies of the same packet
2632 multiple switch topology (one or more ESMs, zero or more PMs). It is