Lines Matching refs:modem
17 therefore it supports just about every bit bang modem on a
34 This driver supports the EPP modem.
40 ser12: This is a very simple 1200 baud AFSK modem. The modem consists only
43 for handling the HDLC protocol. The modem connects to a serial port,
48 par96: This is a modem for 9600 baud FSK compatible to the G3RUH standard.
49 The modem does all the filtering and regenerates the receiver clock.
52 The PC then empties the shift register in a burst. This modem connects
53 to the parallel port, hence the name. The modem leaves the
57 picpar: This is a redesign of the par96 modem by Henning Rech, DF9IC. The modem
63 EPP: This is a high-speed modem adaptor that connects to an enhanced parallel port.
94 utility. If you are only using one modem, you can also configure the
102 Both lines configure the first port to drive a ser12 modem at the first
109 Both lines configure the first port to drive a picpar modem at the
129 par96: the software DCD algorithm for this type of modem is rather poor.
130 The modem simply does not provide enough information to implement
132 feeds the DCD input of the PAR96 modem, the use of the hardware
135 picpar: the picpar modem features a builtin DCD hardware, which is highly