Lines Matching refs:SW2
775 < | SW1 | | SW2 | |
803 SW2 1-6: Reserved for Future Use
1020 | | | SW2 |
1033 SW2: DIP-Switches for Memory Base and I/O Base addresses
1056 The I/O base address is coded with DIP-Switches 6,7 and 8 of SW2:
1070 DIP Switches 1-5 of SW2 encode the RAM and ROM Address Range:
1337 The eight switches in SW2 are used to set the node ID. Each node attached
1534 SW2 1-8: Node ID Select (ID0-ID7)
1547 The eight switches in SW2 are used to set the node ID. Each node attached
1779 | |SW2| |
1798 SW2 1-8 Node ID Select (ID0-ID7)
1811 The eight switches in SW2 are used to set the node ID. Each node attached
1913 | | SW2 | ON arcNet |
1941 SW2 1-8: Node ID Select
2052 | |SW2 NODE ID| | | | XTAL | |
2081 SW2 1-8 Node ID Select (ID0-ID7)
2093 The eight switches in SW2 are used to set the node ID. Each node attached to
2413 | |o|o|o|o|o|o|o|o| | SW1 || SW2 ||
2479 The first three switches in switch group SW2 are used to select one
2500 Switches 4-6 of switch group SW2 select the Base of the 16K block.
2502 positions, determined by the offset, switches 7 and 8 of group SW2.
2627 The eight switches in group SW2 are used to set the node ID.
2790 SW2 1-8: Node ID Select (ID0-ID7)
2806 The eight switches in SW2 are used to set the node ID. Each node attached
2923 | | SW2 | | |
2956 SW2 1-3: Memory Buffer/PROM Address
2981 The last three switches in switch group SW2 are used to select one
3003 Switches 1-3 of switch group SW2 select the Base of the 16K block.