Lines Matching refs:Boot

689 *) To enable the 8K Boot PROM install the jumper ROM.
1037 JP2: Boot-ROM enabled if closed
1040 U3: Boot-ROM Socket          
1398 located in any of eight positions. The address of the Boot Prom is
1414 *) To enable the Boot ROM install the jumper JP1
1726 JP 4  : Boot PROM enable   CLOSE - enabled
1804 ROM         Boot ROM socket
1997 located in any of eight positions. The address of the Boot Prom is
2013 *) To enable the Boot ROM set the switch 8 of switch block SW3 to position ON.
2137 located in any of eight positions. The address of the Boot Prom is
2153 *) To enable the Boot ROM short the jumper J2.
2209    |  Boot PROM socket IRQ-jumpers                            |_  Diagnostic
2547 *) To enable the 8K Boot PROM install the jumper ROM.
2869 located in any of eight positions. The address of the Boot Prom is
2885 *) To enable the Boot ROM set the jumper 8 of jumper block SW3 to position ON.
2974    To enable the 8K Boot PROM position SW1 switch 8 on (UP) labeled ROM.