Lines Matching refs:and

7 Note: The Intel(R) PRO/Wireless 2915ABG Driver for Linux and Intel(R)
45 Intel wireless LAN adapters are engineered, manufactured, tested, and
46 quality checked to ensure that they meet all necessary local and
48 are designated and/or marked to ship into. Since wireless LANs are
50 satellites, and other licensed and unlicensed devices, it is sometimes
51 necessary to dynamically detect, avoid, and limit usage to avoid
53 provide test data to prove regional and local compliance to regional and
55 product is granted. Intel's wireless LAN's EEPROM, firmware, and
57 radio operation and to ensure electromagnetic compliance (EMC). These
59 channel scanning, and human exposure. 
63 adapters (e.g., the EEPROM and firmware). Furthermore, if you use any
71 the warranty and/or issues arising from regulatory non-compliance, and
76 modules, and accordingly, condition system-level regulatory approval
77 upon receipt and review of test data documenting that the antennas and
78 system configuration do not cause the EMC and radio operation to be
100 For information on building and installing the driver, see the INSTALL
110 + WEP (OPEN and SHARED KEY mode)
111 + 802.1x EAP via wpa_supplicant and xsupplicant
113 + Full B and G rate support (2200 and 2915)
125 The distinction between officially supported and enabled is a reflection 
126 on the amount of validation and interoperability testing that has been
146 	Set to 0 to disable the auto scan-and-associate functionality of the
148 	for and associate to a network until it has been configured with 
156 	matching the channel and network name parameters provided.  
167 	info is logged.  See the 'dvals' and 'load' script for more info on
168 	how to use this (the dvals and load scripts are provided as part 
243 An entry in the sysfs can support reading and/or writing.  You can 
245 and can set the contents via echo.  For example:
264 (in the event that there are more than one device installed) and device 
296 	3 = Both HW and SW RF kill active (radio off)
301 	NOTE: If you enable the SW based RF kill and then toggle the HW
316 	running ifconfig and is therefore disabled by default.
323 message stating the detected geography code and the number of 802.11
352 sequence and requirements for the driver to be able to create, join, or 
415 being made available for testing and cutting edge users.  The stability 
416 and functionality of the development releases are not know.  We make
417 efforts to try and keep all snapshots reasonably stable, but due to the
418 frequency of their release, and the desire to get those releases 
427 The driver requires a firmware image, download it and extract the
443 For general information and support, go to:
453   This program is free software; you can redistribute it and/or modify it