Lines Matching refs:and

32 Intel wireless LAN adapters are engineered, manufactured, tested, and
33 quality checked to ensure that they meet all necessary local and
35 are designated and/or marked to ship into. Since wireless LANs are
37 satellites, and other licensed and unlicensed devices, it is sometimes
38 necessary to dynamically detect, avoid, and limit usage to avoid
40 provide test data to prove regional and local compliance to regional and
42 product is granted. Intel's wireless LAN's EEPROM, firmware, and
44 radio operation and to ensure electromagnetic compliance (EMC). These
46 channel scanning, and human exposure.
50 adapters (e.g., the EEPROM and firmware). Furthermore, if you use any
58 the warranty and/or issues arising from regulatory non-compliance, and
63 modules, and accordingly, condition system-level regulatory approval
64 upon receipt and review of test data documenting that the antennas and
65 system configuration do not cause the EMC and radio operation to be
87 potential fixes and patches, as well as links to the development mailing list
93 - Managed (BSS) and Ad-Hoc (IBSS)
94 - WEP (shared key and open)
102 The distinction between officially supported and enabled is a reflection
103 on the amount of validation and interoperability testing that has been
166 	3 = Both HW and SW RF kill active (radio off)
171 	NOTE: If you enable the SW based RF kill and then toggle the HW
179 software to turn the radio off and on.  On other laptops, however, the switch
180 is controlled through a button being pressed and a software driver then making
181 calls to turn the radio off and on.  This is referred to as a "software based
215 packet processed to sleep is shorter and the sleep period is longer.
218 must buffer packets at the AP until the station wakes up and requests 
222 to try and find a firmware update for your AP, or disable power 
226 iwconfig and iwpriv.  iwconfig is used to turn power management on, off, 
227 and set it to auto.
232 	iwpriv eth1 set_power 0    Sets power level to AUTO and enables 
246 wait before powering the radio and querying the access point for buffered
247 packets), and z is the 'power level'.  If power management is turned off the
255 For general development information and support,
260 The ipw2100 1.1.0 driver and firmware can be downloaded from:  
274   This program is free software; you can redistribute it and/or modify it