Lines Matching refs:proximity
16 BH1770GLC and SFH7770 are combined ambient light and proximity sensors.
17 ALS and proximity parts operates on their own, but they shares common I2C
19 but ALS side results are used to estimate reliability of the proximity sensor.
25 amount of reflected IR light and produces proximity result. Resolution is
27 reliability of the proximity results. Thus ALS is always running while
28 proximity detection is needed.
32 by using a delayed work. As long as there is proximity threshold above
33 interrupts the delayed work is pushed forward. So, when proximity level goes
35 finally run. This is handled as no proximity indication.
86 RO - measured proximity value
93 RW - enable / disable proximity - uses counting logic
94 1 enables the proximity
95 0 disables the proximity
98 RW - number of proximity interrupts needed before triggering the event
102 i.e. when proximity on has been reported.
106 i.e. when proximity off has been reported.
109 RO - Supported proximity measurement rates in Hz
112 RW - threshold level which trigs proximity events.