Lines Matching refs:enabled
44 enabled and if respective hardware is present. The text in square brackets at
48 ACPI ACPI support is enabled.
49 AGP AGP (Accelerated Graphics Port) is enabled.
50 ALSA ALSA sound support is enabled.
51 APIC APIC support is enabled.
52 APM Advanced Power Management support is enabled.
53 ARM ARM architecture is enabled.
54 AVR32 AVR32 architecture is enabled.
55 AX25 Appropriate AX.25 support is enabled.
56 BLACKFIN Blackfin architecture is enabled.
57 CLK Common clock infrastructure is enabled.
58 CMA Contiguous Memory Area support is enabled.
59 DRM Direct Rendering Management support is enabled.
61 EDD BIOS Enhanced Disk Drive Services (EDD) is enabled
62 EFI EFI Partitioning (GPT) is enabled
63 EIDE EIDE/ATAPI support is enabled.
65 FB The frame buffer device is enabled.
66 FTRACE Function tracing enabled.
67 GCOV GCOV profiling is enabled.
68 HW Appropriate hardware is enabled.
69 IA-64 IA-64 architecture is enabled.
70 IMA Integrity measurement architecture is enabled.
71 IOSCHED More than one I/O scheduler is enabled.
72 IP_PNP IP DHCP, BOOTP, or RARP is enabled.
73 IPV6 IPv6 support is enabled.
74 ISAPNP ISA PnP code is enabled.
75 ISDN Appropriate ISDN support is enabled.
76 JOY Appropriate joystick support is enabled.
77 KGDB Kernel debugger support is enabled.
78 KVM Kernel Virtual Machine support is enabled.
79 LIBATA Libata driver is enabled
80 LP Printer support is enabled.
81 LOOP Loopback device support is enabled.
82 M68k M68k architecture is enabled.
85 MDA MDA console support is enabled.
86 MIPS MIPS architecture is enabled.
87 MOUSE Appropriate mouse support is enabled.
89 MTD MTD (Memory Technology Device) support is enabled.
90 NET Appropriate network support is enabled.
91 NUMA NUMA support is enabled.
92 NFS Appropriate NFS support is enabled.
93 OSS OSS sound support is enabled.
94 PV_OPS A paravirtualized kernel is enabled.
95 PARIDE The ParIDE (parallel port IDE) subsystem is enabled.
96 PARISC The PA-RISC architecture is enabled.
97 PCI PCI bus support is enabled.
98 PCIE PCI Express support is enabled.
99 PCMCIA The PCMCIA subsystem is enabled.
100 PNP Plug & Play support is enabled.
101 PPC PowerPC architecture is enabled.
102 PPT Parallel port support is enabled.
103 PS2 Appropriate PS/2 support is enabled.
104 RAM RAM disk support is enabled.
105 S390 S390 architecture is enabled.
106 SCSI Appropriate SCSI support is enabled.
109 SECURITY Different security models are enabled.
110 SELINUX SELinux support is enabled.
111 APPARMOR AppArmor support is enabled.
112 SERIAL Serial support is enabled.
113 SH SuperH architecture is enabled.
115 SPARC Sparc architecture is enabled.
116 SWSUSP Software suspend (hibernation) is enabled.
117 SUSPEND System suspend states are enabled.
118 TPM TPM drivers are enabled.
119 TS Appropriate touchscreen support is enabled.
120 UMS USB Mass Storage support is enabled.
121 USB USB support is enabled.
122 USBHID USB Human Interface Device support is enabled.
123 V4L Video For Linux support is enabled.
124 VMMIO Driver for memory mapped virtio devices is enabled.
125 VGA The VGA console has been enabled.
126 VT Virtual terminal support is enabled.
127 WDT Watchdog support is enabled.
128 XT IBM PC/XT MFM hard disk support is enabled.
129 X86-32 X86-32, aka i386 architecture is enabled.
130 X86-64 X86-64 architecture is enabled.
134 XEN Xen support is enabled
207 CONFIG_ACPI_DEBUG must be enabled to produce any ACPI
273 This feature is enabled by default.
415 machines (where it is enabled by default) for a
448 for AMD IOMMU. With this option enabled, AMD IOMMU
515 Format: { "0" | "1" } (0 = disabled, 1 = enabled)
516 0 - kernel audit is disabled and can not be enabled
519 will be fully enabled by the userspace auditd.
520 1 - kernel audit is initialized and partially enabled,
522 RAM until it is fully enabled by the userspace
617 clocks that have not been explicitly enabled by a Linux
618 device driver but are enabled in hardware at reset or
930 filter feature can be enabled at boot time. Just
1054 the normal console is initialized. It is not enabled by
1319 force: allow force enabled of undocumented chips (ICH4,
1360 requires that i8042.debug=1 be enabled)
1417 platform up to 6 ports are supported, enabled by
1690 kASLR is disabled by default. When kASLR is enabled,
1748 kmemcheck=1 (enabled)
1763 Default is 1 (enabled)
1767 Default is 1 (enabled) if in 64-bit or 32-bit PAE mode.
1771 Default is 1 (enabled)
1779 Default is 1 (enabled)
1788 Intel chips. Default is 1 (enabled)
1792 Default is 1 (enabled)
2141 touchscreen support is not enabled in the mainstream
2453 xsaveopt supports it on xsaveopt enabled systems.
2461 memory on xsaves enabled systems.
2741 enabled, this kernel boot option can be used to
2751 enabled, this kernel boot option can be used to
2754 Safety option to keep boot IRQs enabled. This
2801 IRQ routing is enabled.
2806 is enabled by default. If you need to use this,
2911 Keep all power-domains already enabled by bootloader on,
2984 If enabled, warn about various signal handling
3035 0 = disabled, 1 = enabled (default).
3164 batch limiting is re-enabled.
3456 enabled if running jitter sensitive (HPC/RT) workloads.
3470 If enabled at boot time, /selinux/disable can be used
3655 on older distributions. When this option is enabled
3774 that can be enabled or disabled just as if you were
3808 be enabled again by echoing '1' into the "tracing_on"
3890 if the first one fails (default 1 = enabled).
4096 Default is 1, i.e. UTF-8 mode is enabled for all
4157 save/restore/migration must be enabled to handle larger