Lines Matching refs:early

249 			Enable table checksum verification during early stage.
250 			By default, this is disabled due to x86 early mapping
280 			Disable installation of static SSDTs at early boot time
726 			Start an early, polled-mode console on the 8250/16550
817 	ddebug_query=   [KNL,DYNAMIC_DEBUG] Enable debug messages at early boot
975 			is useful for tracking down temporary early mappings
978 	earlycon=	[KNL] Output early console device and options.
980 			When used with no options, the early console is
985 			Start an early, polled-mode console on a cadence serial
995 			Start an early, polled-mode console on the 8250/16550
1005 			Start an early, polled-mode console on a pl011 serial
1011 			Start an early, polled-mode console on an msm serial
1017 			Start an early, polled-mode console on an msm serial
1022 		smh	Use ARM semihosting calls for early console.
1030 			Use early console provided by serial driver available
1038 			Use early console provided by Freescale LP UART driver
1088 	ekgdboc=	[X86,KGDB] Allow early kernel console debugging
1204 			as early as possible in order to facilitate early
2621 	ohci1394_dma=early	[HW] enable debugging via the ohci1394 driver.
2821 		noearly		[X86] Don't do any early type 1 scanning.
3088 			out at early boot.  This is used for diagnostic
3318 			Run the RCU early boot self tests
3321 			Run the RCU bh early boot self tests
3324 			Run the RCU sched early boot self tests
3329 			used for early userspace startup. See initrd.
3768 			to facilitate early boot debugging.
3789 			tracing ring buffer. This is useful for early boot up
3843 	udbg-immortal	[PPC] When debugging early kernel crashes that