Lines Matching refs:to
1 Welcome to Beta Release 2 of the combination ISDN driver for SpellCaster's
4 guaranteed to fail. If you have a DataCommute/PRI installed in the test
6 be usable. To see what we have done to Beta Release 2, see section 3.
12 our own option and without warranty. If you choose to assume all and
13 total risk by using this driver, we encourage you to join the beta
16 To join the Linux beta mailing list, send a message to:
18 contents of the message. Do not include a signature. If you choose to
19 remove yourself from this list at a later date, send another message to
28 1.3 How do I setup my system with the correct software to use
36 2.5 What to do if it doesn't load
37 2.6 How to setup ISDN4Linux with the driver
49 source form and needs to be complied before it can be used. It has been
54 ISDN4Linux is a driver and set of tools used to access and use ISDN devices
57 you need to configure your kernel for ISDN support and get the ISDN4Linux
64 channels can be specifically bound to particular interfaces.
74 allow us to utilize all of the available RAM on the adapter through
77 have been improved to better detect available shared RAM pages and
80 We have significantly reduced the amount of time it takes to load
86 combination up to a maximum of four adapters per system.
92 1.3 How do I setup my system with the correct software to use
108 This package may fail to compile for you so you can alternatively
124 3. Change directory to /usr/src/spellcaster
138 you can specify but you shouldn't need to use any unless this doesn't work.
152 2.5 What to do if it doesn't load
154 If, when you try to install the driver, you get a message mentioning
159 driver failed to detect an adapter or failed to find resources needed such
161 resources available, use the insmod options detailed in sc(4) to override
171 2.6 How to setup ISDN4Linux with the driver
183 A) 10 steps to the establishment of a basic HDLC connection
188 This file is a script used to configure a BRI ISDN TA to establish a
195 iii) set the Layer 2 protocol to hdlc
196 iv) set the eaz of the interface to be the phone number of that
198 v) to turn the callback features off, set the callback to "off" and
199 the callback delay (cbdelay) to 0.
200 vi) the hangup timeout can be set to a specified number of seconds
202 viii) use the ifconfig command to bring up the network interface with
203 a specific IP address and point to point address
204 ix) add a route to the IP address through the isdn0 interface
213 This file is a script used to configure a BRI ISDN TA to establish a
215 identical to the HDLC connection example except that the packet
216 encapsulation type has to be set.
218 use the same procedure as in the HDLC connection from steps i) to
220 "encap" to syncppp. With this done, the rest of the steps, iv) to x)
225 xi) use the ipppd function found in /sbin/ipppd to set the following:
227 xiii) set the mru size to 2000
228 xiv) link the two /dev interfaces to the daemon
238 This file is a script used to configure a BRI ISDN TA to accept a
244 iii) set the Layer 2 protocol to hdlc and the Layer 3 protocol to
246 iv) set the packet encapsulation to syncppp
247 v) set the eaz of the interface to be the phone number of that
249 vi) to turn the callback features off, set the callback to "off" and
250 the callback delay (cbdelay) to 0.
251 vi) the hangup timeout can be set to a specified number of seconds
255 x) use the ifconfig command to bring-up the ippp0 interface with a
256 specific IP address and point to point address
257 xi) add a route to the IP address through the ippp0 interface
258 xii) use the ipppd function found in /sbin/ipppd to set the following:
260 xiv) set the mru size to 2000
262 xvi) link the two /dev interfaces to the daemon
264 NOTE: To use the MLPPP connection to dial OUT to a MLPPP connection, change
265 the inbound telephone numbers to the outgoing telephone numbers of the MLPPP
271 When using the "scctrl" utility to upload firmware revisions on the board,
276 It was noted that in Beta Release 1, the module would fail to load and result