Lines Matching refs:call

47     supported prior to calling register_isdn(). Upon return of the call,
162       int     flag: 0 = call from within kernel-space. (HL-driver must use
164                     1 = call from user-space. (HL-driver must use
186       int     flag: 0 = call from within kernel-space. (HL-driver must use
188                     1 = call from user-space. (HL-driver must use
269     (Response to an incoming call)
292     actively rejecting an incoming call.
417     With this command, the HL-driver is told to proceed with a incoming call.
428     With this command, the HL-driver is told to alert a proceeding call.
439     With this command, the HL-driver is told to redirect a call in proceeding
452     With this call, the LL-driver invokes protocol specific features through
454     The call is not implicitely bound to a connection.
490     With this call, the HL-driver signals the availability of new data
503     With this call, the HL-driver signals an incoming call to the LL.
504     If ICALLW is signalled the incoming call is a waiting call without
519       0           = No device matching this call.
520       1           = At least one device matching this call (RING on ttyI).
528                     Used when a user space prog needs time to interpret a call
542     With this call, the HL-driver signals availability of the ISDN-card.
553     With this call, the HL-driver signals unavailability of the ISDN-card.
564    With this call, the HL-driver signals the successful establishment of
575    With this call, the HL-driver signals the successful establishment of
579    The HL driver should call this when the logical l2/l3 protocol 
592    With this call, the HL-driver signals the shutdown of a
595    rejected a call.
605    With this call, the HL-driver signals the shutdown of a
609    The HL driver should call this as soon as the logical l2/l3 protocol 
620    With this call, the HL-driver delivers charge-unit information to the
633    With this call, the HL-driver signals that it will be unloaded now. This
644     With this call the HL-driver signals the delivery of a data-packet.
646     does not need this call.
658     With this call, the driver has to respond to a prior ISDN_CMD_DIAL, if
669     This call is for HL-drivers, which are unable to check card-type
673     the real amount, perform this call, allocating additional channels.
683     With this call, the HL-driver delivers CAUSE-messages to the LL.
696     With this call, the HL-driver delivers DISPLAY-messages to the LL.
707     With this call, the HL-driver delivers protocol specific infos to the LL.
708     The call is not implicitely bound to a connection.
721     With this call, the HL-driver signals the LL to disable or enable the
723     The call may be used to reduce the available number of B-channels after
751     With this call the HL-driver signals a fax sub-command to the LL.