Lines Matching refs:you

21 - if you are using a known controller
22 - if you are using a known dance pad
23 - if using an unknown device (one not listed below), what you set in the
27 If you set dpad_to_buttons to N and you are using an unknown device
29 If you said Y it will map the d-pad to buttons, which is needed for dance
78 If you have an unknown xbox controller, it should work just fine with
81 HOWEVER if you have an unknown dance pad not listed below, it will not
82 work UNLESS you set "dpad_to_buttons" to 1 in the module configuration.
84 PLEASE, if you have an unknown controller, email Dom <binary1230@yahoo.com> with
120 Thanks to the trip splitter found on the cable you don't even need to cut the
122 you can still use the controller with your X-Box, if you have one ;)
129 Once you have the adapter cable, if needed, and the controller connected
130 the xpad module should be auto loaded. To confirm you can cat
152 If you have an unrecognized controller please see 0.3 - Unknown Controllers
157 To test this driver's functionality you may use 'jstest'.
164 If you're using a normal controller, there should be a single line showing
165 18 inputs (8 axes, 10 buttons), and its values should change if you move
166 the sticks and push the buttons.  If you're using a dance pad, it should
169 It works? Voila, you're done ;)