Lines Matching refs:one

39 the output lines of the parallel port are shared, while one of 5 available
42   This protocol is handled by the gamecon.c driver, so that's the one
52 some data pin. For most gamepad and parport implementations only one pin is
223 was written. It allows only one joystick / gamepad per parallel port, but
262   For some people just one joystick per parallel port is not enough, and/or
263 want to use them on one parallel port together with NES/SNES/PSX pads. This is
274 and one pullup resistor. First, you connect the Directions and the button
290 for the NES / SNES pads in section 2.1 of this file - that is, one data pin
308 supports only one button per joystick. For more information on how to build the
328     +---------------------------->  Data     ---  (one of 10,11,12,13,15)
397 Genesis 6 pads use, it needs one more select pin. Anyway, it is still
434   Using gamecon.c you can connect up to five devices to one parallel port. It
461   Should you want to use more than one of parallel ports at once, you can use
500   Should you want to use more than one of these joysticks/pads at once, you
515   Should you want to use more than one of these interfaces at once, you can