Lines Matching refs:button
226 For the basic 1-button Multisystem joystick you connect its wires to the
240 resistors on each of the direction and button signals, like this:
249 For joysticks with two buttons you connect the second button to pin 7 on
274 and one pullup resistor. First, you connect the Directions and the button
284 For two button sticks you also connect the other button.
308 supports only one button per joystick. For more information on how to build the
341 All the Sega controllers are more or less based on the standard 2-button
347 The SMS gamepads are almost exactly the same as normal 2-button
451 4 | Multisystem 1-button joystick
452 5 | Multisystem 2-button joystick
490 1 | Multisystem 1-button joystick
491 2 | Multisystem 2-button joystick
496 8 | Multisystem 1-button joystick (v0.8.0.2 pin-out)
497 9 | Two Multisystem 1-button joysticks (v0.8.0.2 pin-out)